Flexible TPU
The printed material flexes around the cable instead of acting like a rigid panel insert.
FluxJet cable management
Route Electronics Cables Through the Kayak Panel
The FluxJet Cable Pass-Through Gasket is a flexible TPU insert for routing fish-finder, sonar, transducer, and other electronics cables through the FluxJet kayak panel system.
This product is the physical, professionally printed gasket. A separate STL download is available for owners who want to print their own.
Product details
A Flexible Pass-Through for Electronics Wiring
The gasket organizes the point where a cable passes through the panel and flexes around the routed wire.
FluxJet Panel Fit
The shape and mounting pattern are designed for the FluxJet kayak panel system.
Electronics Routing
Use it for suitable fish-finder, sonar, transducer, power, or data cables.
Physical Printed Part
Order this item when you want the gasket printed by FluxJet instead of downloading a file.
Installation planning
Check the Cable and Fasteners Before Installation
Confirm that the cable, connector, planned route, and panel location work together before removing any existing component or tightening the gasket.
Rod-holder installations need longer screws.
If the gasket is installed with the rod holder, the original rod-holder screws are not long enough to secure both parts. FluxJet recommends three M5 x 20 mm plastic-forming screws for that configuration.
Disconnect the Electronics
Turn off and disconnect the equipment before moving or routing its cable.
Plan the Cable Route
Confirm the cable reaches the display, transducer, power source, or other connection without pulling tight.
Position the Gasket
Place the cable through the flexible center and align the gasket with the intended FluxJet panel mounting points.
Secure and Recheck
Use the correct fasteners for the configuration, tighten evenly, and confirm the cable can move as required without rubbing or binding.
Choose your option
Buy the Printed Gasket or Print Your Own
FluxJet offers the finished physical part and a separate STL download for owners with a 3D printer that can handle flexible TPU.
This product
Printed TPU Gasket
Choose this option when you want the physical flexible gasket printed by FluxJet.
- Physical printed component
- Flexible TPU material
- No printer or slicer required
- Designed for FluxJet panel routing
DIY option
Cable Gasket STL File
Choose the separate digital product when you want to print the gasket yourself or through a printing service.
- Digital STL file
- Flexible TPU printing capability required
- Filament and slicer settings are your responsibility
- FluxJet personal-use terms apply
Before going on the water
Check the Cable Pass-Through
The gasket is described as water-resistant, not waterproof. Check the complete installation and protect electrical connections according to the equipment manufacturer's instructions.
Inspect the TPU
Replace the gasket if the flexible center is torn, stretched, split, or no longer sits properly around the cable.
Check the Cable
Look for abrasion, tight bends, pinching, or tension between the gasket and the connected equipment.
Check the Fasteners
Confirm the gasket is secure without overtightening the fasteners against the printed TPU part.
Product questions
Cable Pass-Through Gasket FAQ
What is the cable pass-through gasket used for?
It creates a flexible, organized entry point for routing suitable electronics cables through the FluxJet kayak panel system.
What is the gasket made from?
It is 3D printed in flexible TPU, a thermoplastic polyurethane material that can flex around a routed cable.
What types of cables can it route?
It is intended for suitable fish-finder, sonar, transducer, power, data, and other electronics cables. Check your cable and connector dimensions before installation.
Is the cable pass-through waterproof?
It is described as water-resistant, not waterproof. The complete installation, cable fit, fasteners, panel, and electrical connections all affect water protection.
Can I reuse the rod-holder screws?
Not when the gasket and rod holder are installed together. The original screws are not long enough to secure both parts. FluxJet recommends three M5 x 20 mm plastic-forming screws for that configuration.
Is this a physical gasket or a digital file?
This product is the physical TPU gasket. The STL file is a separate digital product.
Can I print the gasket myself?
Yes. FluxJet offers a separate STL download. Printing it requires a printer capable of handling flexible TPU, suitable filament, slicing software, and appropriate print settings.
How will it ship if I also ordered a FluxJet kayak?
The gasket normally ships with the kayak when both are on the same pre-order or backorder. To request earlier accessory shipping, leave a note in the Order Comments field during checkout or contact FluxJet.
More FluxJet resources
Parts, Files, and Owner Support
Order the Printed Cable Gasket
Return to the product controls to check current availability and add the physical TPU gasket to your order.